FLASHFORGE DREAMER 3D Printer User Guide : Single & Dual-Extrusion Print

Single-Extrusion Print

1. Open FlashPrint by doubleclicking on the icon.

2. Click on [ Load ] and choose an .stl file from hard drive.

3. The object will then be shown on the screen. 

4. Click on the object and then click on [ Extruder ], select [ Use left extruder ].

*Left extruder will be used for illustration purposes.

5. Now the 3D model is ready to be created. 

Dual-Extrusion Print

1. Open FlashPrint by doubleclicking on the icon.

2. Press [ Load ] and choose an .stl file from hard drive.

3. The object will then be shown on the screen.

4. Press [ Load ] and choose another (or the same) file from hard drive.

5. Click on the object and then click on [ Extruder ], select [ Use left

extruder ].

NOTE: One object is turned to green, that indicates it will be print with the left extruder. 

6. Now the 3D model is ready to be created.