Filament Installation is accessed by selecting the 3D Inkbutton in the top left corner of the M3D Software. You will be guided to install filament Externally or Internally.
DO NOT attempt to load both ports at the same time during printing.
Internal Filament
Figure. Showing the filament path taken when installing internal filament. The path
begins underneath the print bed through the black filament tube.
External Filament
Figure. An example of an ideal external filament path. External filament is installed
via the external feed port located at the top of the extruder head. Always keep a clear
path between your filament spool and the print head.
*NOTE Factory Filament *
There may be factory filament installed externally, let the printer extrude this first and then insert your filament of choice.
Notes for Loading Filament
In both scenarios, you need to feel the filament “catch” the extruder gear. When you are loading filament, apply constant force on the filament to push it forward into the extruder gear. A good way to test if the filament is “caught” is to lightly pull back
and forth on the filament. If the filament does not pull out, then you have engaged with the gear.
3D Ink™ Cheat Code
Your 3D Ink™ Cheat Code is written on the front of your Micro Spool. If it is not, you can type in either ABS or PLA depending on which filament type you are using.
Tag:
3D Printer App
,
3D Printers User Guide
Return to top of page