Installation
Levelling the printer is important for making good quality prints.
1. Level printer
Place the printer on a concrete floor and check if the printers is level
2. Spirit level
Level the printer with the included spirit level. Check all the three axis as shown. Be sure all the three axis are levelled if not use a wrench to move up or down the machine feet to get the machine level
3. Measure
Measure both diagonals of the printer and make sure the lenghts are the same. Should be around 1580 mm
4. Placing control box
When the printer is leveled correctly, place the controlbox on top of the printer
Tag:
3D Printers User Guide
Return to top of page