3D Printer User Guide : 123D Design - Grouping objects
TOP Posts
-
Warping happens when the plastic cools and contracts. As the print cools down and shrinks slightly it starts to pull in on itself. Eventu... -
Overhangs The reason overhangs come out uglier than a straight wall is simply because new layers are not properly supported by the pr... -
Stringing The primary countermeasure for stringing is something called retraction. When you have retraction enabled the printer will ... -
Since 2012 in Berlin, Mr. Josef Prusa RepRap introduced at a conference on expansion. He was very proud of this product. But then, they hav... -
SketchUp is a 3D modeling program for applications such as architectural, interior design, civil and mechanical engineering. Its powerful ye... -
Overheating The plastic that exits your extruder may be anywhere from 190 to 240 degrees Celsius. While the plastic is still hot, it i... -
FreeCAD is a parametric 3D modeler built for product design and engineering. Feature rich and with a high learning curve, FreeCAD is rath... -
Leaning: A leaning print is usually caused by friction causing the print head to move a shorter distance than expected. Make sure that ... -
This step by step guide might seem long and drawn out, but we highly suggest you follow it to get started. The touch panel can be used to c... -
Digital cameras today are nothing like they were just a decade ago, now providing advantages that many of us would have only dreamed poss...
Return to top of page