Installing the Afinia H800 3D Printer

You will need the USB Cable, Power Supply and Cable, and Filament Spool to complete the Afinia H800 3D Printer installation.

Driver and Software Installation

Mac

Insert the Installation Disc into your Mac. Open the disc, go into the Mac folder, and

double-click Afinia Mac Setup.pkg. Follow the prompts through the installation. The drivers will be added and the Afinia software will be installed to the Applications folder.

Windows

Insert the Installation Disc into your PC. If the installer does not launch automatically, start the Afinia 3D Printer setup.exe file in the PC directory on the installation disc.

Note: This installs the Afinia 3D Printer software, the Afinia 3D Printer drivers, and the Afinia

3D Printer sample files into your Program files\Afinia\Afinia 3D Printer folder.

Follow the instructions in the Installer to be sure the drivers and software are all in place before attempting to use the Printer. The instructions below will follow the same order as those in the Installer.

Installing the Printer

Connect the power adapter as shown with the flat side out and turn on the power switch.

Long Press the Power button on the control panel to initialize the printer.

Connect the printer to your computer using the supplied USB cable.

The Printer will be recognized and automatically installed when it is connected to your PC or Mac.

USB connection 

Loading the Filament

A. Insert the end of filament into one end of the Filament tube, which is on the upper right side of the spool holder.

B. Feed the filament through the tube until about 4 inches of filament protrudes from the tube.

C. Put the Filament Spool onto the holder with the end of the filament pointing up from the back.

D. Feed the filament into the extruder head as far as it can go, about 2 inches.

E. Long Press the Filament button.

a. If the filament doesn’t start feeding when the printer beeps, gently push in the filament.

F. Replace the magnetic filament cover.